Mount the VIBRA-Sync™ Hub in a covered location within Wi-Fi range. Connect the Hub to power.

Mount the Node on or by the vibratory equipment to be monitored. Mounting next to the motor is advised. Connect the Node to power.

Mount the Sensor on the pan. The included cable connects the Sensor to Node.

Install the VIBRA-Sync™ mobile app available on apple and android onto a phone or tablet.

With VIBRA-Sync™ powered on, push and hold the Wi-Fi reset button until all LEDs turn off and restart. Then push the reset button.

Navigate to the Wi-Fi SETUP tab in the mobile app.

Push the Setup button and follow the prompts.

After the Hub is connected to the internet the green LED will be on solid.

If setup fails, try steps again starting from holding Wi-Fi reset button on the Hub.